SHWT5010B Exhaust Wrap Basalt Black 50mm (2in) x 10m

Our SAAS exhaust wrap is a must have for your vehicle’s exhaust system. Designed to retain heat within the exhaust pipes, exhaust wrap helps improve the efficiency of the exhaust by decreasing density, and increasing the flow of exhaust gases. Under-bonnet temperatures can be reduced when using exhaust wrap. Your vehicle’s electronics, air-intake systems, dash components and interior also benefit from exhaust wrap, as it reduces their heat absorption

Fitting Notes:

Basalt exhaust wrap is installed dry, as the material is pliable. To prevent your mild steel exhaust/pipes from rust, use a high-temperature silicone coating spray to seal and protect your pipes and wrap.

• Basalt material
• Length: 10m
• Width: 50mm (2 in)
• Temperature rating (intermittent): 2500°F / 1371°C
• Temperature rating (direct): 1800°F / 982°C
• Thermal conductivity: 0.031 – 0.038 W/mK
• Thermal expansion coefficient: 8.0 ppm/°C
• Sound absorption coefficient: 0.90 – 0.99%
• Thermal coated fibres: No

Please Note:

SHCT300 Steel Ties 300mm Length 10 Pack

The SAAS durable stainless steel ties are designed to effectively secure your SAAS exhaust wrap onto your exhaust and are available from our store

SAAS recommends the use of: (BALCHAN EXTREME 1100°C HIGH HEAT SILICONE COATING PAINT CLEAR – Aussie Made)

To prevent your mild steel exhaust/pipes from rust and to seal and protect your pipes and wrap, We Sell this in our store.

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.