REDARC – TOW-PRO ELITE V3 ELECTRIC BRAKE CONTROLLER Plus DIY HOT WIRE install kit

This is the 3rd generation of REDARC’s Tow-Pro brake controller. The Tow-Pro Elite provides users with the ability to swap between both Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode for off-road driving. This unit Compatible with all modern vehicles, ADR approved installation and ESC/DSC compatibility

Manufacturer Part Number: EBRH-ACCV3

What’s included:

Remote Head Assembly
Main unit
Remote Head Nut
Remote Head Bezel
Remote Head Cable 1m
Main Unit Wires and Connector 0.5m

Wiring Kit for Electric Brake Controller

This kit contains everything you require to carry out a professional installation of your new electric brake controller and provide a 12V power supply to your trailer plug. This kit contains cable specifically designed for brake controller installations. Besides having a wire for your power supply, earth, and brake controller output, a 3mm wire is also provided to allow pickup of the brake signal from the trailer plug rather than under the dash at the stoplight switch. This bypasses any electric modules or Canbus circuits that are present in many modern vehicles.

Kit includes:

8 metres of 4 core ‘Brake Controller’ wire
5 metres of 13mm split loom conduit to protect your wiring
30 amp auto reset circuit breaker for power supply
30 amp auto reset circuit breaker for brake controller
2x circuit breaker protective covers
10x cable ties
Crimp terminals – 4x small ring, 3x large ring, 5x large joiner, 1x medium joiner
Fitting Instructions

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.