X1 400ml Spray Can of Grey Thick-Film Primer Filler

Corrosion protection with excellent filling and coverage for metallic surfaces.

Excellent adhesion properties

• Adheres to aluminium, bare and galvanised sheet metal, old paint etc.
• Also adheres in combination with PU and MS polymer sealing compounds

Long-lasting corrosion protection

Quick-drying

Excellent stretching and run-off behaviour

Heat-resistant up to 110°C

Very easy to sand

VOC-compliant

• Lower solvent content
• Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)

Notice

Can be used on galvanised and hot-dip galvanised surfaces following pre-treatment with zinc cleaner under certain conditions. Turn the can upside down and spray until the valve is empty after use.

Application area

For professional repairs of minor unevenness, scratches and sanding marks (spot repair, accident repair work, bodywork repairs, paintwork etc.).

Instructions

The surface must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake can well before use. Apply a thin coat for the first spray coating. Observe the flash-off time. Can be painted after approx. 15 minutes with all conventional 1-component, 2-component and water-based top-coat paint systems.

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.