• Specification

Synthetic resin and water-based coating compound that can be painted.

• Can be painted after approx. 24 hours with all paint systems, especially with water-based paints
• Guarantees clean, mist-free operation
• No run-off at vertical points
• Resistant and readily grindable after drying
• Suitable for furnace drying at up to 60°C

Notice
Do not spray on joints, engines, gears and brake systems. Protect from frost! Store between 10°C and 30°C.

Application area
For repair and/or restoration of the original structure and for protection against stone chips and corrosion in all visible areas, e.g. front and rear valances, side skirts, etc. Highly suitable as anti-drone mass for indoors, e.g. doors, engine and luggage compartment.

Instructions
Shake can well before use. The substrate must be dry and free of rust, dirt and grease. Old coating compounds to be removed.  For processing with spray gun, art. number 0891 1063 or 0891110640. Optimum spraying distance: 30 cm. Working pressure: 3 – 6 bar.