Specification

High-quality rust remover with cracking effect and visual cold indicator
Cracking effect

By cooling the material surface down to -45°C, micro-fine cracks occur in the corrosion layer at the connection points. These “crack open” the rust, ensuring better penetration of the active agent

Visual cold indicator

• When cooled to a minimum temperature of -5°C, the sprayed area turns blue. The processing temperature is achieved.

Optimum rust removal

• Rust is quickly penetrated and loosens seized up screws
• Heavily rusted screw connections are loosened without damaging them

Optimum corrosion protection due to addition of corrosion-protection additives

• Long-term protection against further corrosion

Resin and acid-free

Silicone-free

Compatible with rubber and seals

Application area

For non-destructive loosening of extremely rusty and oxidized screw connections on passenger cars, trucks, agricultural machines, construction machines, equipment and devices.

Instructions

Remove as much of the coarse soiling as possible. Shake can before use. Spray the jammed parts (bolts) from an extremely short distance until the sprayed area turns blue. With stubborn parts, repeat the process.

Contents: 400 ml
Container: Aerosol can
Min. temperature conditions: -10 °C
Max. temperature conditions: 40 °C
Conditions for viscosity of oil basis: at 40°C
Min. flashing point of active ingredient: -80 °C
Silicone-free: Yes
Acid-free: Yes
AOX-free: Yes
Resin-free: Yes

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.