Wurth ASSEMBLY POWER CLEANER

High cleaning performance

Ideal for the removal of oily, greasy, sooty, and lightly resinified dirt

Short flash-off time

• Fast cleaning with no residue
• Short downtime of the machine parts to be treated
• No second application required

Good material compatibility

• FKM and polymer seals do not swell.
• Causes no corrosion on metal surfaces such as iron, steel, stainless steel, aluminium, brass

Spray head with direct jet

• Targeted and effective cleaning of contaminated parts

Acetone-, AOX- and silicon-free

Notice

Prior to application, check the compatibility of rubber, plastic parts and painted surfaces on an invisible area.

Chemical basis: Calcium complex grease
Colour: Black
Smell/fragrance: Characteristic
Density: 0.75 g/cm³
Density conditions: at 20°C
Min. temperature conditions: -30 °C
Max. temperature conditions: 150 °C
Max. short-term temperature resistance: 140 °C
Min. flashing point: -80 °C
AOX-free: Yes
Water-soluble: No
Resistance against: Lye, Salt water, Acid, Water
VOC concentration (CH): 80.78 %
Contents: 300 ml
Container: Aerosol can

Wurth ASSEMBLY PASTE

High-performance assembly paste spray for run-in lubrication

Protects against wear and guarantees emergency running properties

The solid lubricating film reduces friction, prevents running hot and hot seizing.

High resistance

Resistant to water, salt water, diluted acids and alkalines

• The 60% solids content is resistant to petrol, diesel fuel etc.

Temperature- and pressure-resistant

• Thermally stable from –35°C to +150°C, higher temperatures are possible for short periods of time if the air inlet is reduced
• Pressure-resistant up to yield point of all known metals

Application area

As run-in lubricant for new machines, guides, threaded spindles, splined shafts, heavily loaded toothed gearing, worm gears and manual gearboxes, gearwheels and toothed racks, as well as for chemical apparatus
Plain bearings subjected to heavy thermal and surface loading, pressed seats of all kinds for pulling on and pressing in rolling bearings, pulleys, wheels, flanges and pins; fittings (slide valves, valves, taps)
For deep-drawing, tapping, drilling and sawing
For cutting, punching and bending tools

Instructions

Shake the product before use. Spray onto the surface to be treated and steam off the solvent.

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.