VHT FLAME PROOF White Primer PAINT for EXHAUST ENGINE HIGH TEMPERATURE SP118

$21.00

Out of stock

VHT FLAMEPROOF™ COATING

x1 Spray Can

VHT FlameProof™ Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high-temperature applications. VHT FlameProof™ Coating will withstand temperatures up to 2000°F (1093°C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.

Temperature: 1300°F-2000°F (704°C-1093°C)

Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads

Finish: Flat

Dry Time: Curing time required and can be done on or off vehicle

Curing FlameProof™

VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).

On the Vehicle

Paint must be completely dry before curing

Run at idle for 10 minutes

Cool for 20 minutes

Run at idle for 20 minutes

Cool for 20 minutes

Run under normal operating conditions for 30 minutes

Off the Vehicle

Paint must be completely dry before curing

Heat to 250°F (121°C) for 30 minutes

Cool for 30 minutes

Heat to 400°F (204°C) for 30 minutes

Cool for 30 minutes

Heat to 650°F (343°C ) for 30 minutes

Caution: Do not exceed the temperature of the least heat-tolerant component or the base metal

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.

Manufacturer Part Number

Type

Scroll to Top