x1 Stainless Steel Anderson Plug Surface Mount Cover (Inc Anderson Plug)
Australian made stainless steel surface mounting cover, this mount is a neat simple solution for mounting a 50 Amp Anderson Plug on any flat Surface of your Canopy, head board, Ute tray, camper, caravan or boat.
What’s Included:
– 1x 304 Stainless Cover Plate (Dimensions: 95mm x 46mm x 18mm)
– 2x Stainless Bolts
– 2x Stainless Nuts
– 1x Genuine Grey 50 Amp Anderson Plug
Installation guide.
– Assess where to mount the cover plate and ensure there is sufficient room behind for mounting & wiring.
– Mark the 2x holes. These points will be the bolt holes. Predrill 4mm holes
– Mark out where the wiring will go through the surface behind the Anderson and drill hole to suit
– Pull Wiring through the hole, Pre-wire the Anderson plug and fit terminals.
– Using the bolts fit the Anderson plug between the cover plate and the surface, the bolts are a neat fit and slide straight through the plug.
Check out our store to see other combinations available.
PLEASE NOTE: Item DOES NOT INCLUDE dust cover. This listing is for the stainless steel cover plate, stainless fasteners and x1 50 Amp Anderson Plug only any images showing the dust cover are ONLY there as guide to how they can fit/be used.
*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.