x1 Stainless Steel Anderson Plug Surface Mount Cover POWDER COATED SEMI GLOSS BLACK to suit x1 3pin 50 Amp Plug.

(No Andersons Included) Any Image on Anderson plugs are only there to show how they can be used or added.

Australian made stainless steel surface mounting cover, this mount is a neat simple solution for mounting a x1 3pin 50 Amp Anderson Plug on any flat Surface of your Canopy, head board, Ute tray, camper, caravan or boat.

What’s Included:

– 1x 304 Stainless Cover Plate POWDER COATED BLACK (Dimensions: 95mm x 46mm x 18mm)

– 4 x zinc-nickel black coating Bolts

– 4 x zinc-nickel black coating Nuts

Installation guide.

– Assess where to mount the cover plate and ensure there is sufficient room behind for mounting & wiring.

– Mark the 4 holes. These points will be the bolt holes. Predrill 4mm holes

– Mark out where the wiring will go through the surface behind the Anderson and drill hole to suit

– Pull Wiring through the hole, Pre-wire the Anderson plug and fit terminals.

– Using the bolts fit the Anderson plug between the cover plate and the surface, the bolts are a neat fit and slide straight through the plug.

Check out our store to see other combinations available. 

PLEASE NOTE: Item DOES NOT include the Anderson plugs. This listing is for the stainless steel cover plate IN BLACK, stainless fasteners ONLY, if you want this with the Andersons or in Stainless Steel finish, please see our other listing in our store.

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.