Roadsafe 4wd HD Recovery Tow Point Kit for Nissan Navara D40

Recovery Tow Points – PAIR

To suit:

• Nissan Navara D40
• Nissan Pathfinder

This is for the PAIR of Tow Points.

When you hit the tracks you need to have reliable recovery points that are built & tested tough!

There is alot of talk out there about using the Factory recovery points on your vehicle…..DON’T!!!

These are factory tie town points uséd when the vehicles are shipped from the manufacturer & are not designed for Recovery situations.

Tow Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts, and any additional, vehicle specific mounting hardware required to ensure secure fitment to vehicles. Correct fitment of these components is critical for yours & others personal safety.

Each pair of Tow Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped.  Tow point fitting instructions can be found here.

Features

• Made from 10mm SS41 carbon steel plate
• Direct bolt onto your chassis using high tensile bolts – no cutting or welding required
• Powder coated yellow for high visibility
• Matched pair – specific to each side
• Allow for use of 3.25T bow shackles and a bridle strap
• Rated to a Working Weight Limit (WWL) of 3250 Kg per tow point

Kit contains:

• 2 x Tow Points
• All hardware for fitment

If a bullbar is fitted modifications might be required to the bar bracket, and/or additional hardware might be required such as longer bolts etc

Fitment Notes – These are uséd as a guide if your bullbar is not listed then we cant guarantee if the points will suit your vehicle & bullbar.

Nissan Pathfinder

• ARB – Yes
• Opposite Lock – Yes

D40 Spain & Thai Built

• ARB – Yes
• Ironman – Yes
• Opposite Lock – Yes
• XROX – Yes
• MCC – Yes
• Genuine Bullbar – Yes

It is the Tow Points themselves as supplied that have been tested to the WLL advised. It is at the vehicle owners discretion for fitment, ensuring that the chassis is adequately designed, constructed and/or rated to suit this application.

It is recommended that Tow Points are fitted by a qualified mechanic with specialist 4WD knowledge, who has an understanding of your vehicle including weights carried, the style of Bull Bar, general usage etc. as in some circumstances these Tow Points may not be suitable for your vehicle.

These Tow Points have been designed and tested for straight line pull.  The Tow Points have not been tested for lifting purposes & should not be uséd for lifting, the forces applied differ between lifting and straight line pull type recoveries. Roadsafe Tow Points are FEA Tested during design and Destruction tested during development to establish Working Load Limits.

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.