ROADSAFE 4WD Pair Tow Points Ford Ranger PJ PK Mazda BT 50 Gen 1 07-11

Suits-

Ford Ranger PJ PK & Mazda BT 50 Gen 1 07-11

Contents-

• 2 x Tow Points
• All hardware for fitment

Tow Points have been designed as matched pairs, supplied in LH/RH for vehicle specific fitment. Your purchase will include high tensile bolts, and any additional, vehicle specific mounting hardware required to ensure secure fitment to vehicles. The correct fitment of these components is critical for your & other personal safety.
These are factory tie town points used when the vehicles are shipped from the manufacturer & are not designed for Recovery situations.

Each pair of Tow Points is supplied with vehicle specific fitment instructions. These instructions should be followed during fitment to ensure all steps are taken for correct installation, so when required, the points will be at their optimum Working Load Limit (WLL) as stamped.

Made from 18mm SS41 carbon steel plate|
Direct bolt onto your chassis using high tensile bolts – no cutting or welding required
Powder coated yellow for high visibility
Matched pair – specific to each side
Allow for use of 4.75T bow shackles and a bridle strap
Rated to a Working Weight Limit (WWL) of 5000 Kg per tow point

Notes:

Please ensure the chosen Tow Point suits your vehicle. If a bulbar is fitted, modifications might be required to the bar bracket and/or additional hardware might be required (Longer bolts, etc) to facilitate fitment.

Fitting instructions:

The Most recent fitting instructions for each Roadsafe 4WD tow point can be viewed on their website or by scanning the QR code on the box.