REDARC – TOW-PRO ELITE V3 ELECTRIC BRAKE CONTROLLER Plus DIY install kit

This is the 3rd generation of REDARC’s Tow-Pro brake controller. The Tow-Pro Elite provides users with the ability to swap between both Proportional mode (inertia sensing) for highway driving conditions and User-Controlled mode for off-road driving. This unit Compatible with all modern vehicles, ADR approved installation and ESC/DSC compatibility

Manufacturer Part Number: EBRH-ACCV3

What’s included:

Remote Head Assembly
Main unit
Remote Head Nut
Remote Head Bezel
Remote Head Cable 1m
Main Unit Wires and Connector 0.5m

Wiring Kit for Electric Brake Controller

This kit contains everything you require to carry out a professional installation of your new electric brake controller. It contains the same quality components that we use for brake controller installations in our workshop. Power Cable Prewired and Trailer wiring fitted with boot lace terminals. Installation has never been easier.

Kit includes:

8 metres of 5mm twin core wire (Red/Blue) Pre joined Boot Lace Terminals
3.5 metres of 6mm twin core Tycab (Red/Black) Pre fitted 30 amp auto reset circuit breaker & Battery Connections

Cable ties – x10
Crimp terminals –  x3 large Yellow joiners
Fitting Instructions

Please Note: This kit is not suitable for Ford PX3 Ranger and Everest (MY18 onwards)  please cut and paste below into eBay search to correct kit    https://www.ebay.com.au/itm/13…

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.