The power supply for the ESC must be wired directly to the tow vehicle’s battery and a 30 Amp fuse or circuit breaker fitted. The AL-KO ESC should be connected to the tow vehicle using a standard 12 pin plug or 2 pin Anderson plug connector.

This Kit Provides you with everything required to run directly from the vehicles main battery to the rear of the vehicle into and red Anderson plug ( we do have another kit in our store if your ESC is through the 12 pin trailer)

This kit contains;

• 8 metres of 6 mm twin core cable. Made by Tycab in Australia.
• 5 metres of 13 mm split loom conduit to help protect your cabling
• 10 cable ties to secure your cabling
• Genuine Cole Hersee 30 amp auto reset circuit breaker
• Red circuit breaker protective cover to prevent short circuiting of the circuit breaker terminals
• 2 x 6 mm cable lugs for circuit breaker connection
• 2 x 8 mm cable lugs for battery connection
• Heatshrink for cable lugs
• Genuine 50 amp RED Anderson Plug
• Anderson Plug Cover
• Mounting bracket for Anderson Plug with fasteners included. This bracket is designed to mount to the existing trailer plug bracket fitted to most towbars and provides a neat and easy location to mount your Anderson Plug. If this bracket is not suitable for your vehicle, please see our other listing which contains a different Anderson Plug mount.

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.