AL-KO ESC 6mm twin 30 Amp powered Anderson run for tow vehicle – to 12 pin plug

AL-KO ESC 6mm twin 30 Amp powered Anderson run for tow vehicle – to 12 pin plug


Availability: 49 in stock

The power supply for the ESC must be wired directly to the tow vehicle’s battery and a 30 Amp fuse or circuit breaker fitted. The AL-KO ESC should be connected to the tow vehicle using a standard 12 pin plug or 2 pin Anderson plug connector.

This Kit Provides you with everything required to run directly from the vehicles main battery to the rear of the vehicle into and red Anderson plug ( we do have another kit in our store if your ESC is through a RED Anderson plug)

This kit contains;

  • 8 metres of 6 mm twin core cable. Made by Tycab in Australia.
  • 10 metres of 13 mm split loom conduit to help protect your cabling
  • 10 cable ties to secure your cabling
  • Genuine Cole Hersee 30 amp auto reset circuit breaker
  • Red circuit breaker protective cover to prevent short circuiting of the circuit breaker terminals
  • 2 x 6 mm cable lugs for circuit breaker connection
  • 2 x 8 mm cable lugs for battery connection
  • Heatshrink for cable lugs

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.




Manufacturer Part Number


Scroll to Top