Description

• Can be painted over
• Can be painted over with all commercially available top-coat paint systems after 3 hours
• Can be filled
• Environmentally friendly, as dispersion-based
• Reliably stops the corrosion process and provides an optimised application surface for additional paint work.
• Rust converter penetrates into the rust, reacts with the rust and converts iron oxide into a stable, insoluble, blue-black, metal-organic complex.

Notice

Do not wash treated surfaces with water. Immediately wash the rust converter off painted surfaces. Do not use in direct sunlight, on hot surfaces over +40°C and when there is risk of frost. Protect from frost. Clean the equipment with water after use.

Usage

Instructions

The surface must be clean, dry and free from grease

Remove dissolved rust, paint and dirt with a wire brush, scraper etc.

Apply a thin, even coat with a brush or roller and prevent runs

Paint within 48 hours

Observe the reaction times

Mask off surfaces not to be treated

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.