NOLATHANE OFFSET CAMBER UPPER CONTROL ARMS suit TOYOTA HILUX 4WD 2005-On

Part Number : 45970

A short fall of the modern day IFS 4wd is the adjustment range provided for successful wheel alignments, this becomes even more of an issue when the vehicle is lifted by more than 1 inch. Not only does the vehicle run into camber and caster issues, but ball joint articulation and clearance issues to the coil over strut at ride and droop height. The new Nolathane offset UCA (Upper Control Arm) is an all-in-one solution for any vehicle that has been lifted between 30mm and 70mm. Providing an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures quoted are based off an approximate 50mm/ 2 inch) along with greater clearance to the coil over strut and more articulation of the arm by virtue of new maintenance free GIIRO bushing technology.

Vehicle Applications

45970 is suitable for the following vehicles.

FOTON TUNLAND 2012-ON – TUNLAND P201 4WD

TOYOTA FORTUNER 2015-ON – FORTUNER GUN156 4WD

TOYOTA HILUX 2005-2015 – HILUX GGN25R, KUN26R (N70) 4WD

TOYOTA HILUX 2015-ON – HILUX GGN125R, GUN126R, 136R (N80) 4WD

Kits Required: 1
Warranty: 3 Year / 60,000Kms
Kit Contents: 2 Arms

*All pictures shown are for illustration purposes only. The actual colours may vary from those shown depending on the device you are using to view the product or the angle of the item is photographed. Actual products may vary due to product enhancements or updates. The listing should be referred to for the description of the product, any questions should be asked prior to purchase.